Tapinsert (Insert nut สำหรับอุดหลังจากที่สวมอัดแบบเย็น)
This insert nut is slighly striked by handle pressing machine or hammer, which make it more suitable for quick mounting. Beside that,this part also have a high efficiency of strength, by using bolt-screwing technology,
| Major Insertion Methods | Press-In Inserts（insert by using handpress machine） |
| Material | Brass (C3604) |
| Plastic | Thermoplastics (thermoset plastics for some situation) |
Features
- Easily mounting
- Suitable for any kind of complicated work
- Special tool unnecessary
- Full compliance with RoHS Directive
Dimensions
Dimensions Drawing
| Part Number | Thread and Pitch | A | B | C | Pilot Hole Dimension on Plastic (Reference) |
|
| TS3.7-M2-4.0 | M2×0.4 | 3.71 | 4.00 | （3.10） | φ3.2 | ※ |
| TS4.5-M2.5-5.8 | M2.5×0.45 | 4.50 | 5.80 | （3.90） | φ4.0 | ※ |
| TS4.5-M3-5.8 | M3×0.5 | 4.50 | 5.80 | （3.90） | φ4.0 | ※ |
| TS6.2-M4-8.2 | M4×0.7 | 6.15 | 8.20 | （5.50） | φ5.6 | ※ |
| TS6.9-M5-9.5 | M5×0.8 | 6.90 | 9.50 | （6.30） | φ6.4 | ※ |
| TS8.5-M6-12.7 | M6×1.0 | 8.51 | 12.70 | （7.90） | φ8.0 | ※ |
※Standard parts Unit.ｍｍ
Tapsert Performance data (Reference)
| Part Number | ABS | |
| Pull-out (N) | Torque-out（N・m） | |
| TS3.7-M2-4.0 | 658 | 0.87 |
| TS4.5-M2.5-5.8 | 1,030 | 1.57 |
| TS4.5-M3-5.8 | 1,021 | 2.18 |
| TS6.2-M4-8.2 | 1,814 | 4.98 |
| TS6.9-M5-9.5 | 2,215 | 8.31 |
| TS8.5-M6-12.7 | 1,928 | 17.58 |
※The data above are experimental results obtained by Micro Fasteners. They are not a guarantee of the strength of our products.
1N≒0.098kgf 1N-m≒9.8kgf-cm
1N≒0.098kgf 1N-m≒9.8kgf-cm
NOTE
- Please use the screw longer than the over-all length of insert （Dimension B）
- When inserts are tightened by screws, choose the screw length so that screws do not reach the bottom of insert pilot holes.
- When finish screw insert, please mount the torgue in order to screw Tapsert out.
- The diameter of the pilot hole for the mounting object should be smaller than the outer diameter of the insert (Dimension A).
- Products shape could have some difference due to part number.
- Be careful when using a Tapsert with a thermo-setting resin. threading the part will be tight, depending on the diameter of the pilot hole that is selected.
- Pilot hole diameters are for reference only.
- The diameter should be determined by testing before use.
- Please contact us if you need Pb-free material for environmental reasons.
- The specifications are subject to change without notice.
- Please contact us if you have any other questions.
